The CraftPro Router Table will suit craftsmen & woodworking enthusiasts. It is packed with the necessary features to maximise the versatility of all popular portable routers.
Large laminated MDF table.
Quick release aluminum extrusion back fence with sliding MDF cheeks.
Removable 6.35mm thick aluminium insert plate with 98mm diameter aperture pre drilled for Trend TBC routers and T11 routers.
Quick Raiser and Quick Release facility for the Trend T11 router.
High back fence with fully adjustable guard assembly.
Fully adjustable side finger pressure.
Full perimeter leg stand with adjustable feet.
Two insert rings 31.8mm and 67.5mm diameter to reduce table aperture.
Lead on pin for bearing guided curved work.
Edge planing facility on back fence of 1.4mm and 2.4mm.
Cable management clips.
No volt release switch.
Mitre fence with zeroing and spelch block facility.
Bench fixing brackets.
Router not included.
For UK & Eire sale only.
115v routers over 1850W (including T10 and T11) cannot be used with no volt release switch router tables.

Specification:
Rating=Craftsman
Voltage*=115 volt
Table top size=610x405x26mm
Bench height=410mm
Router cutter aperture=98mm
Max cutter dia=80mm
Max cutter height=55mm
Max component length**=590mm
Insert ring sizes=20 31.8/67.5 35 54 68 & 83mm
Backfence height=68mm
Dust spout aperture=57mm
Edge planing up to=1.4 & 2.4mm
Weight=13.6kg
Voltage=115v
Max. material thickness with pressures=60 mm
Max. material width with pressures=120 mm (cutter centre)
End of life=See below for Environmental Policy link
Not intended for continuous production or production line use.
*115v routers over 1850W (including T10 and T11) cannot be used with no volt release switch router tables.
**Workpiece supports required for longer lengths.

Includes:
6 x Insert rings
1 x No-volt release switch
1 x Side pressure
1 x Top pressure
1 x Mitre fence
1 x Lead-on pin
1 x Safety guard
1 x Pushstick