Trimmer & Profiler Cutters

Trend 37/1X1/4TC Trimmer 25mm Diameter 12mm Length

Has three flutes and has bevelled corners to prevent scoring and is for flush trimming of hardwood or plastic edge strip.Specification:D=25 mmC=12 mmA=90 degreesOL=44.5 mmShank Diameter=1/4 inch

From £64.42

More Details

Trend 46/05X1/4TC Guided Trimmer 6.3mm Diameter 12.7mm Length

Two flute mini-trim with guide bearing will profile intricate shapes. Max. 2.0mm trimming.Ideal for acrylic trimming.Specification:D=1/4 inchD=6.3 mmC=1/2 inchC=12.7 mmB=6.3 mmA=90 degrees

From £26.86

More Details

Trend 46/06X1/4TC Combi Trimmer 24mm Diameter

A self-guided combination trimmer. A 90 degree trim is obtained by engaging the bottom half. A 45 degree trim is obtained by lowering the cutter. A fine height adjuster is recommended when using this cutter. A larger 20mm b...

From £58.28

More Details

Trend 46/07X1/4TC Guided Trimmer 6.3mm Diameter 25.4mm Length

Two flute mini-trim with guide bearing will profile intricate shapes. Max. 2.0mm trimming.Ideal for acrylic trimming.Specification:D=1/4 inchD=6.3 mmC=25.4 mmB=Fractionally larger than cutter dia mm

From £29.07

More Details

Trend 46/090X1/2TC Guided Profiler 19mm Dia X 63mm Cut

Profiler with shank mounted bearing guides.For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap s...

From £86.01

More Details

Trend 46/09X1/2TC Guided Profiler 19mm Dia X 50mm Cut

Profiler with shank mounted bearing guides.For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap s...

From £73.61

More Details

Trend 46/100X1/2TC Guided Profiler 25mm Dia X 25mm Cut

Profiler with shank mounted bearing guides.For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap s...

From £69.08

More Details

Trend 46/101X1/2TC Guided Profiler 25.4mm Dia X 45mm Cut

Profiler with shank mounted bearing guides.For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap s...

From £75.97

More Details

Trend 46/10X3/8TC Profiler Cutter

Profiler with shank mounted bearing guides.For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap s...

From £69.80

More Details

Trend 46/19X1/4TC Double Overlap Cutter

Roughing cutter which leaves an overhang of 3mm for secondary final trimming.Life can be extended by varying height of cutter.Specification:D=12.7 mmC=1 inchC=25.4 mmB=19 mmA=90 degreesOL=67 mm

From £43.83

More Details

Trend 46/200X1/4TC Low Profile Trimmer 19.1mm Diameter 16mm Length

Self guided with low profile ball bearing guide and bearing fixing screw. For use in restrictive applications or within rebates of minimum 8mm. Down cut to prevent breakout on veneers.Specification:D=3/4 inchD=19...

From £46.91

More Details

Trend 46/201X1/4TC Low Profile Trimmer 19.1mm Diameter 25.0mm Length

Self guided with low profile ball bearing guide and bearing fixing screw. For use in restrictive applications or within rebates of minimum 8mm. Down cut to prevent breakout on veneers.Specification:D=3/4 inchD=19...

From £54.51

More Details

Trend 46/20X1/2TC Guided Trimmer 19.1mm Diameter 25mm Length

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left befo...

From £54.51

More Details

Trend 46/20X1/4TC Guided Trimmer 19.1mm Diameter 25mm Length

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left befo...

From £53.01

More Details

Trend 46/210X1/2TC Guided 90 Degree Trimmer 12.7mm Diameter 38.1mm Length

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left before cop...

From £53.78

More Details

Trend 46/211X1/4TC Guided Trimmer 18.2mm Diameter 14mm Length

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left befo...

From £34.61

More Details

Trend 46/212X1/2TC Guided Trimmer 19.1mm Diameter 50mm Length

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left befo...

From £80.63

More Details

Trend 46/22X1/2TC Trimming Cutter 18.2mm Diameter

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left befo...

From £85.87

More Details

Trend 46/23X1/2TC Guide Trimmer 12.7mm Diameter 50mm Length

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling use the bearing to follow a template or base edge of board. A maximum of 3mm overlap should be left before copy ...

From £85.87

More Details

Trend 46/2X1/4TC Trimming Cutter 19.1mm Diameter

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling use the bearing to follow a template or base edge of board. An approximate 3mm overlap should be left befo...

From £43.83

More Details

Trend 46/300X1/2TC Double Guided Trim Profile Cutter

Ball bearings fitted to both nose and shank. Allows templates to be placed either on top or the bottom of the material for ease of routing. Allows for irregular grained timber to be profiled more easily by turning component other way ...

From £83.69

More Details

Trend 46/301X1/2TC Double Guided Trim Profile Cutter

Ball bearings fitted to both nose and shank. Allows templates to be placed either on top or the bottom of the material for ease of routing. Allows for irregular grained timber to be profiled more easily by turning component other way ...

From £90.57

More Details

Trend 46/3X1/4TC Bevel Trimmer 20mm Diameter 14mm Length

Cut a wider edge line at an angle of 80 degrees. A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges.Specification:D=20 mmC=14 mmA=80 degreesOL=57 mm...

From £52.18

More Details

Trend 46/501X1/2TC Double Guided Trim Profile Cutter Four Flute

Four fluted TCT trimmer/profiler.Super fine finish.Ball bearings fitted to both nose and shank. Allows templates to be placed either on top or the bottom of the material for ease of routing. Allows for irregular grained tim...

From £93.65

More Details

Trend 46/521X1/4TC Guided 1mm Rebater Profiler For Damaged Trim

Two fluted for clean finish nose bearing to rout a rebate and shank bearing to profile edge flush.Ideal to remove damaged trim on tops to allow new trim to be added.Tungsten carbide tipped for abrasive materials and is ideal for use on ...

From £55.05

More Details

Trend 46/6AX1/4TC Bevel Trim Cutter

Cut a wider edge line at an angle of 60 degrees.A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges.Specification:D=29 mmC=13 mmA=60 degreesB=16 mm

From £53.01

More Details

Trend 46/6BX1/4TC Bevel Trim Cutter

Cut a wider edge line at an angle of 45 degrees.A 16mm bearing is supplied as standard. A larger 19mm bearing will spread the wear of the cutting edges.Specification:D=27 mmC=9 mmA=45 degreesOL=51.5 mm...

From £53.78

More Details

Trend 46/6EX1/4TC Bevel Trim Cutter

Gives a smooth bevel finish for laminates and other materials. Bearing follows the board beneath.Specification:D1=5/8 inchesD1=15.9 mmC=1/4 inchesC=6.3 mmOL=53 mmB=1/2 inchesB=12.7 mmA=75 d...

From £27.02

More Details

Trend 46/7X1/4TC Double Overlap Cutter

Trimming top and bottom surfaces simultaneously with bearing following the board. Two fluted. Increased productivity.Specification:D=18 mmC=15 mmC2=9 mmA=90 degreesOL=65 mmShank Diameter=1...

From £73.61

More Details

Trend 46/80X1/4TC Trimming Cutter 12.7mm Diameter

Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay etc. Specification:D=1/2 inchD=12.7 mmC=25.4 mmB=12.7 mmA=90 degreesOL=6...

From £35.35

More Details

Trend 46/82X1/2TC Trimming Cutter 12.7mm Diameter

Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay etc. Has twin bearings for stability by increasing the bearing surface and is an industrial profiling tool for lon...

From £74.49

More Details

Trend 46/85X1/4TC Trimmer And V Groove 16mm Diameter 25.4mm Length

Two flute. For trimming of laminate and solid lipping. 1.6mm deep 'V' groove to hide glue line.Specification:D=16 mmD2=12.7 mmC=1 inchC=25.4 mmB=12.7 mmOL=67 mmShank Diameter=1/4 inc...

From £33.00

More Details

Trend 46/900X1/4TC Guided Profiler 9.5mm Dia X 6mm Cut

Trend Professional 1/4in shank bearing guided trimming cutter - 9.5mm diameter for laminate and template work9.5mm diameter X 6.35mm cutting depth bearing guided trimmer for flush trimming of laminate and veneer work.Extra long shank allo...

From £24.10

More Details

Trend 46/902X1/4TC Guided Profiler 9.5mm Dia X 12.7mm Cut

Trend Professional 1/4in shank bearing guided trimming cutter - 12.7mm diameter for laminate and template work9.5mm diameter X 12.7mm cutting depth bearing guided trimmer for flush trimming of laminate and veneer work.Double shank mounted...

From £30.67

More Details

Trend 46/903AX1/2TC Guided Profiler 9.5mm Dia X 25mm

Profiler with shank mounted bearing guides.For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap s...

From £47.43

More Details

Trend 46/903X1/4TC Guided Profiler 9.5mm Dia X 25mm

Profiler with shank mounted bearing guides.For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap s...

From £47.43

More Details

Trend 46/904X1/4TC Guided Profiler 9.5mm Dia X 32mm

Profiler with shank mounted bearing guides.For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap s...

From £51.29

More Details

Trend 46/90X1/4TC Guided Profiler 16mm Dia X 25mm Cut

Trend Professional 1/4in shank bearing guided trimming cutter - 15mm diameter for laminate and template work15mm diameter X 25mm cutting depth bearing guided profiling cutter perfect for templating and trimming work in timber laminate and woo...

From £55.19

More Details

Trend 46/910X1/4TC Guided Profiler 12.7mm Dia X 4mm Cut

Profiler with shank mounted bearing guides.For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap s...

From £31.55

More Details

Trend 46/911X1/4TC Guided Profiler 12.7mm X 6.35mm Cut

Profiler with shank mounted bearing guides.For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/grooving. A 3mm maximum overlap s...

From £36.33

More Details

Customization

Information

Recently Viewed

Your Order

About Us

Other Links

Search