Straight Router Cutters

Trend 10/25X1/2TC Tapered Cutter

Two flute straight cutter with 3 degree taper.Designed for constructing wooden vacuum forming moulds. Tapered sides will allow the mould to release easily. Specification:D=12.7 mmC=32 mmOL=80 mmA=87 de...

From £52.18

More Details

Trend 14/2X1/2TC Up-Down Cutter

Tungsten Carbide Tipped. Two flute cutter with tips sheared up and down giving a fine finish.For trimming veneered and double-faced boards plywoods and natural timbers. These cutters have the action of pushing the chips towards ...

From £65.27

More Details

Trend 2/01X1/4TC Single Flute Cutter 1.5mm Diameter

Eccentric single flute cutters. Cutters are chosen for fast free cutting when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0m...

From £26.86

More Details

Trend 2/02X1/4TC Single Flute Cutter 1.8mm Diameter

Eccentric single flute cutters. Cutters are chosen for fast free cutting when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0m...

From £29.22

More Details

Trend 2/0X1/4TC Single Flute Cutter 1mm Diameter

Eccentric single flute cutters. Cutters are chosen for fast free cutting when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0m...

From £23.07

More Details

Trend 2/10X1/4TC Single Flute Cutter 2mm Diameter

Eccentric single flute cutters. Cutters are chosen for fast free cutting when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0m...

From £28.47

More Details

Trend 2/12X1/4TC Single Flute Cutter 2.7mm Diameter

Eccentric single flute cutters. Cutters are chosen for fast free cutting when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Small diameter tools must be handled with care to avoid breakage....

From £30.67

More Details

Trend 2/15X1/4TC Single Flute Cutter 3mm Diameter

Eccentric single flute cutters. Cutters are chosen for fast free cutting when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Small diameter tools must be handled with care to avoid breakage....

From £32.27

More Details

Trend 2/1X1/4TC Single Flute Cutter 1.6mm Diameter

Eccentric single flute cutters. Cutters are chosen for fast free cutting when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0m...

From £33.00

More Details

Trend 2/45X1/4TC Single Flute Cutter 5mm Diameter

Eccentric single flute cutters. Cutters are chosen for fast free cutting when cutting speed takes preference over finish. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used ...

From £39.14

More Details

Trend 2/61X1/4TC Single Flute Cutter 6.3mm Diameter

Eccentric single flute cutters. Cutters are chosen for fast free cutting when cutting speed takes preference over finish. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used ...

From £35.35

More Details

Trend 2/6X1/4TC Single Flute Cutter 6.3mm Diameter

Eccentric single flute cutters. Cutters are chosen for fast free cutting when cutting speed takes preference over finish. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used ...

From £26.15

More Details

Trend 2/7X1/2TC Single Flute Cutter 9.5mm Diameter

Eccentric single flute cutters. Cutters are chosen for fast free cutting when cutting speed takes preference over finish. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used ...

From £33.73

More Details

Trend 21/1X1/2TC Guided Housing Cutter

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings.Specification:D=3/4 inchD=19.1 mmC=11.1 mmB=19.1 mmOL=63.5 mmShank Diameter=1/2 in...

From £51.42

More Details

Trend 21/1X1/4TC Guide Housing Cutter

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings.Specification:D=3/4 inchD=19.1 mmC=11.1 mmB=19.1 mmOL=57 mmShank Diameter=1/4 inch

From £51.42

More Details

Trend 21/2X1/2TC Guided Housing Cutter

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings.Specification:D=1 inchD=25.4 mmC=11.1 mmB=25.4 mmOL=64 mmShank Diameter=1/2 inch

From £53.78

More Details

Trend 21/3X1/2TC Guided Housing Cutter

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings.Specification:D=1 1/2 inchD=38.1 mmC=16 mmB=38.1 mmOL=69 mmShank Diameter=1/2 inch

From £75.23

More Details

Trend 3/01X1/2TC Two Flute Cutter 4mm Diameter

TCT for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specification:D=5/32 inchD=4 mmC=11 mmOL=63 mmShank Diameter=1/2 ...

From £23.81

More Details

Trend 3/01X1/4TC Two Flute Cutter 4mm Diameter

TCT for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specification:D=5/32 inchD=4 mmC=11 mmOL=65 mmShank Diameter=1/4 ...

From £24.53

More Details

Trend 3/02X1/2TC Two Flute Cutter 6.3mm Diameter

TCT for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specification:D=1/4 inchD=6.3 mmC=19 mmOL=64 mmShank Diameter=1/2...

From £35.73

More Details

Trend 3/02X1/4TC Two Flute Cutter 6.3mm Diameter

TCT for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specification:D=1/4 inchD=6.3 mmC=19 mmOL=51 mmShank Diameter=1/4 ...

From £26.86

More Details

Trend 3/03X1/4TC Two Flute Cutter 4.5mm Diameter

TCT for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specification:D=4.5 mmC=11 mmOL=51 mmShank Diameter=1/4 inch

From £26.15

More Details

Trend 3/04X1/4TC Two Flute Cutter 2.5mm Diameter

TCT for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specification:D=2.5 mmC=8 mmOL=48 mmShank Diameter=1/4 inch

From £24.53

More Details

Trend 3/05X1/4TC Two Flute Cutter 3mm Diameter

TCT for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specification:D=3 mmC=11 mmOL=51 mmShank Diameter=1/4 inch

From £24.69

More Details

Trend 3/06X1/4TC Two Flute Cutter 2mm Diameter

Two flutes give a clean finish to cut edges. Specification:D=5/64 inchD=2 mmC=5 mmOL=43 mmShank Diameter=1/4 inch

From £28.47

More Details

Trend 3/06X8MMTC Two Flute Cutter 2mm Diameter

TCT for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specification:D=5/64 inchD=2 mmC=5 mmOL=50 mmShank Diameter=8 mm

From £28.47

More Details

Trend 3/07X1/4TC Two Flute Cutter 4mm Diameter

TCT for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specification:D=5/32 inchD=4 mmC=15.9 mmOL=56 mmShank Diameter=1/...

From £23.07

More Details

Trend 3/08X1/2TC Two Flute Cutter 12.7mm Diameter

TCT for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip.Specification:D=1/2 inchD=12.7 mmC=25 mm

From £30.67

More Details

Trend 3/08X1/4TC Two Flute Cutter 12.7mm Diameter

TCT for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip.Specification:D=1/2 inchD=12.7 mmC=25 mm

From £30.67

More Details

Trend 3/0X1/2TC Two Flute Cutter 4.7mm Diameter

TCT for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specification:D=3/16 inchD=4.7 mmC=11 mmOL=56 mmShank Diameter=1/...

From £24.53

More Details

Trend 3/0X1/4TC Two Flute Cutter 4.7mm Diameter

TCT for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specification:D=3/16 inchD=4.7 mmC=11 mmOL=51 mmShank Diameter=1/...

From £24.53

More Details

Trend 3/10X1/2TC Two Flute Cutter 3.2mm Diameter

TCT for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specification:D=1/8 inchD=3.2 mmC=11 mmOL=56 mmShank Diameter=1/2...

From £24.53

More Details

Trend 3/10X1/4TC Two Flute Cutter 3.2mm Diameter

TCT for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specification:D=1/8 inchD=3.2 mmC=11 mmOL=51 mmShank Diameter=1/4...

From £24.53

More Details

Trend 3/11X1/4TC Two Flute Cutter 3.4mm Diameter

TCT for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specification:D=3.4 mmC=11 mmOL=51 mmShank Diameter=1/4 inch

From £23.07

More Details

Trend 3/12X1/4TC Two Flute Cutter 6.3mm Diameter

TCT for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specification:D=1/4 inchD=6.3 mmC=11 mmOL=44 mmShank Diameter=1/4...

From £23.81

More Details

Trend 3/13X1/4TC Two Flute Cutter 5.5mm Diameter

TCT for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specification:D=7/32 inchD=5.5 mmC=19 mmOL=51 mmShank Diameter=1/...

From £29.94

More Details

Trend 3/1X1/2TC Two Flute 5mm Dia

TCT for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specification:D=13/64 inchD=5 mmC=16 mmOL=64.5 mmShank Diameter=1...

From £28.47

More Details

Trend 3/1X1/4TC Two Flute Cutter 5mm Diameter

TCT for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specification:D=13/64 inchD=5 mmC=16 mmOL=56 mmShank Diameter=1/4...

From £28.47

More Details

Trend 3/20LX1/4TC Pocket Cutter 6.3mm Diameter

A two flute cutters with extra long shanks. Deep grooving rebating and mortising. Useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage. Take more passes than usual...

From £35.35

More Details

Trend 3/20X1/2TC Two Flute Cutter 6.3mm Diameter

TCT for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specification:D=1/4 inchD=6.3 mmC=16 mmOL=69 mmShank Diameter=1/2...

From £36.80

More Details

Customization

Information

Recently Viewed

Your Order

About Us

Other Links

Search