Combination hammer with 2 functions: hammer drilling and chiselling
Metabo VibraTech (MVT): integrated damping system to reduce vibrations in order to protect the user's health
Easily accessible locking switch for chiselling in continuous mode
Vario-Constamatic (VC)-Full wave electronics for working at customised speeds to suit the application materials, and speeds that remain almost constant even under load
Thumbwheel for preselection of the speed and impact rate
Electronic soft start for precise spot-drilling
Optimum heat dissipation and low weight thanks to die cast magnesium gear housing
Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly
Restart protection: prevents unintentional start-up after power supply interruption
Low-dust chiselling and drilling with external dust extraction ESA max (accessories)
Wear Indication for Carbon Brush
Service display, e.g. to indicate when the carbon brush needs to be replaced, and an LED indicating mains voltage
Early warning system thanks to service LED for targeted planning of the carbon brush replacement 8 working hours before switching off
Specification:
Max. single blow energy (EPTA)8.5 J
Maximum impact rate3000 bpm
Rated input power1100 W
Drill-Ø concrete with hammer drills40 mm / 1 9/16 "
No-load speed350 - 540 rpm
Speed at rated load540 rpm
Bit retainerSDS-max
Collar diameter61 mm / 2.4 "
Weight (without power cable)7.1
Cable length6 m / 19.7 ft
Includes:
Side handle
Duster
Plastic carry case
Drilling depth guide
Lubricant for tool shank end