• Vibration absorbers effectively isolate the main and auxiliary handles. The emission value measured at the front handle, for example, is 1.9 m/s² – lower than the threshold value of safety standard EN 60745 (2.5 m/s²). As a consequence, compared with other sanders, the UVA 115 E transmits substantially less vibration to the hands and arms.
• Handle arrangement The handles are positioned to achieve an ideal balance for both one and two-handed operation. To facilitate working near edges, the front handle finishes flush with the sanding plate. The handle can be detached if necessary.
• Delta sanding pad The Delta base plate can be attached, as necessary, without any tools. Configuring the machine for Delta sanding does not require removal of the entire sanding pad.
• First-class sanding performance Together with Abranet© sanding media, the UVA 115 E is the perfect machine for a high removal rate, superb fine finishing, and a long service life. It is also very well equipped for sanding large surfaces.
• Built-in extraction efficiency The suction channels in the sides of the sanding pad enhance the effectiveness of the integrated extraction turbine. Also thanks to the Abranet© abrasive mesh, as much as 90% of the generated dust is collected in the filter bag, even without a separate dust extraction system attached to the machine.
• 10-hole system The MAFELL orbital sander conforms with the standardized 10-hole quick-fit (grip) system.
• Hose connector The machine is connected to a dust extraction system by way of a standard 35 mm connector.
• Universal filter bags The UFB-1 is made of an extremely tear-resistant, anti-static PP nonwoven material. The filter's high air throughput reduces the residual dust to as little as 3%.
• Soft grip Soft grip surfaces prevent the user's hand from slipping. Besides improving safety, they take the fatigue out of working with the UVA 115 E.
• Abranet© abrasive mesh The rear face of the 0.5 mm mesh is textured similar to the velour backing of quick-fit sanding paper. The mesh achieves a high removal rate and is highly compatible with dust extraction solutions. Clogging of the abrasive with dust is reliably prevented, so that material consumption is very low.
• Interface pad The quick-fit UVA-SA interface pad acts as a shield and protects the base plate of the sanding machine against mechanical wear and frictional heat.

Speecification:
Rated input : 450W
Sanding area: 115 x 230mm
Sanding Stroke: 2.6mm
Nominal No. of strokes - no load: 4000-24000 /min
Weight: 2.7kg
Motor: 240V/50Hz

Includes:    
1 x universal filter bag UFB-1
1 x set of Abranet© abrasive mesh strips:
1 x sheet each of Abranet© abrasive mesh strip P 60 / P 80 / P 100 / P 120 / P 150 / P 180 / P 240 / P 320
1 x pack of Abranet© abrasive mesh P 80; 35 strips 093411
1 x pack of Abranet© abrasive mesh P 120; 40 strips 093413
1 x UVA-SA 10 interface pad (10 holes), 115 x 230 mm 093420
1 x Delta 105 sanding pad for quick-fit sanding paper
1 x sheet of Abranet© Delta 105 abrasive mesh, P 120
1 x UVA-SA Delta 105 interface pad 093421
1 x power lead 4 m