M Class extractor with power take off for high performance hazardous dust capture
CLASS M EXTRACTION Meets HSE Construction site regulations to capture microscopic harmful dust particles including silica and MDF dust
99.95% CAPTURE High performance H13 Pleated HEPA Filter System traps dust as fine as 0.3 microns and above
1500W AUTO-START POWER TAKE OFF (1000W on 115V MODEL) Allows the extractor to auto start when a power tool is connected with 3-5 second run on delay to clear residual debris
WET AND DRY PICK UP Dual function pick up for dry materials and wet pick up with auto stop function when liquid capacity is reached
PUSH BUTTON FILTER CLEANING Shake down function clears fine dust build up from the filter to maintain efficient suction power
LARGE COLLECTION DRUM 25 litre dry/17 litre wet capacity for longer run times between emptying
LARGE DUST BAG CAPACITY Captures bigger particles for increased efficiency and safe disposal
LOW FLOW INDICATOR For filter and dust collection management signals when the extraction power is low
DURABLE CONSTRUCTION Heavy duty plastic tank ideal for liquid pick up and high impact protection
DRAIN PORT Liquid drain off port at the bottom of the tank for easy emptying without lifting
FULL TOOL KIT Comes supplied with a full set of cleaning tools for general vacuum cleaning purposes
WIDE WORKING RANGE 5 metre hose and 5 metre cable for extended working distances from a power point
WHEELED BASE Four swivel castors for easy manoeuvrability around the jobsite
For UK & Eire sale only.

Specification:
Rating=Trade
Power input=1200 watt
Voltage=115 volt
Dust category*=M
Tank capacity=25 L dry 17 L wet
Bag capacity=16.5 L
Flow rate=22.5 L/s
Sound pressure Lpa=76 dB(A)
Max suction=147 mbar
Airflow=22.5 l/s
Negative pressure=14.7 Kpa
Cable=5M
Hose=5 M x 39mm OD
* Vacuum cleaners of dust category to EN60335-2-69 for dry vacuuming of materials of exposure limit volume > 0.1 mg/m3 that are hazardous to ones health.
End of life=See below for Environmental Policy link
Vibration=<2.5
Weight=8.89 kg
Acoustic pressure Lwa=88 dB(A)
Dimensions=625 x 380 mm
Power tool adaptor OD=Taper 32 to 36 mm
Synchronised Power take off=1000w max 60w min

Includes:
1 x HEPA Cartridge filter
1 x 5 metre flexible hose
1 x Hard floor brush
1 x Round brush
1 x Crevice tool
1 x Curved metal tube
2 x Metal tube
1 x Power tool adaptor
1 x Synthetic filter bag