Clear plastic template for use with any plunge router to accurately fit 2 3 and 5 lever sash and dead mortise locks.
Clear plastic with magnets to hold metal templates.
Includes six recess and three mortise templates.
Requires 12mm diameter x 63mm cut length cutter with 1/2 inch shank and 30mm guide bush. A 1/4 inch extra long cutter can also be used but deepening of mortise with auger bit will be required.
User made batten 44mm x 34mm x 450mm is also needed.
Suitable for following locks Additions H32306 H32331 Chubb 3U75 3G114 ERA 196-62 201-31 201-32 202-32 208-31 221-31 301-32T 302-32T 467-32T 471-32T 571-32T latch ES bed latch Jewson LISJK072 LISJK100 Legge P3751 P1645 Travis Perkins P19 P20 P22 (802503) P29 (802510) P81 Union L99 Y2201 Y2294 and Yale PM246 PM320 and PM550.
Magnets in the template frame are to hold the metal templates.
Design Reg. No. 00132246-002.
Router not included.

Specification:
Size=320 mm x 135 mm x 8 mm
Imperial (Metric) (D x OL)=Template
22.2x156 mm (7/8inchx 6 1/8inch)=1
22.5x152.5 mm (7/8inchx 6 inch )=2
25.4x133.5 mm (1inchx 5 1/4inch )=5
25.4x153 mm (1inchx 6inch) =7
26x162mm=12
25.1x58mm (ERA)=15
Mortise dimensions
Imperial (Metric) (D x OL)=Template
16x107 mm* (5/8inch x 4 1/4inch)=B
19x78 mm* (3/4inch x 3 1/8inch)=C
16x90 mm*=E
*These are maximum mortise lock case (body) lengths unless radius ends are squared with a chisel. Actual length of mortise is 7mm longer.

Includes:
6 x Face Plate Templates
3 x Mortise Templates