Slotting & Grooving

Trend 10/30X1/2TC Drawer Lock

To increase gluing area producing a strong joint in drawer production.Specification:D=25.4 mmC=12.7 mmOL=49 mmShank Diameter=1/2 inchTimber thickness min.=15 mmTimber thickness max.=25 mmFor stati...

From £45.27

More Details

Trend 10/40X1/2TC Butterfly Spline Cutter 104 Deg

To rout butterfly key and splines in timbers and man-made boards.Use in conjunction with 104 deg (14 deg) dovetail cutter ref. L120 which cuts dovetail pocket.Use in a router table. Cut material in two passes to create a butterfly ...

From £75.97

More Details

Trend 10/50X1/2TC Birdsmouth Cutter 6&12 Sided 30/60 Deg

To make round boxes planters barrels or other multi-sided components. One side of the component is machined with the cutter.Fast and accurate joint creation on timber.For use in a router table.Notch created by cutter provide...

From £70.20

More Details

Trend 10/51X1/2TC Birdsmouth Cutter 8 Sided 45 Deg

To make round boxes planters barrels or other multi-sided components. One side of the component is machined with the cutter.Fast and accurate joint creation on timber.For use in a router table.Notch created by cutter provide...

From £64.33

More Details

Trend 10/99X1/2TC Mitre Lock Jointer

Machining of this joint is carried out by routing one piece with the inside face on the table. The matching corner inside face is machined upright against the fence. Make sure that the cutter is centred on the workpiece. The cutter can...

From £117.04

More Details

Trend 27/35X1/2TC Variable Groover 3mm To 5mm

To adjust the groove width these tools can be re-assembled with the supplied shims and spacers inserted between the groovers giving a 0.1mm increment in thickness.Specification:D=1 31/32 inchD=50 mmC=3-5 mmB=28 m...

From £70.20

More Details

Trend 27/59X1/2TC Variable Groover 5mm To 9mm

To adjust the groove width these tools can be re-assembled with the supplied shims and spacers inserted between the groovers giving a 0.1mm increment in thickness.Specification:D=1 31/32 inchD=50 mmC=5-9 mmB=28 m...

From £76.07

More Details

Trend 30/2X1/4TC Undercut Router Cutter

To produce an undercut on relief lettering to create a more aesthetic appearance as well as for edge grooving.Specification:D=3/4 inchD=19.1 mmC=1/8 inchC=3.2 mmB=12.7 mmE=3.2 mmOL=53 mmSha...

From £46.91

More Details

Trend 30/6X1/4TC Undercut Router Cutter

To produce an undercut on relief lettering to create a more aesthetic appearance as well as for edge grooving.Specification:D=1 inchD=25.4 mmC=1/4 inchC=6.3 mmB=12.7 mmOL=55 mmE=6.35 mmShan...

From £51.42

More Details

Trend 33/10X1/2 Arbor For M12 Bore Groover

Slotters with M12x1.0 threaded bore enables flush recessing in the corner such as for weather proofing. Spacers are supplied to ensure the minimal threaded arbor protrudes below the slotter. Arbor 33/20 enables 12mm bore guide bearings to be f...

From £17.66

More Details

Trend 33/1X1/2 Arbor For Groover 12mm Bore Heavy Duty

Heavy duty arbor with spacers for 12mm bore slotters with or without bearings.Specification:OL=84.5 mmSpigot dia.=12 mmSpigot length incl thread=45 mmSpigot thread length=20 mmDiameter=18.5 mmShank Diam...

From £30.67

More Details

Trend 33/20X1/2 Arbor For M12 Bore Groover

Slotters with M12x1.0 threaded bore enables flush recessing in the corner such as for weather proofing. Spacers are supplied to ensure the minimal threaded arbor protrudes below the slotter. Arbor 33/20 enables 12mm bore guide bearings to be f...

From £17.66

More Details

Trend 33/22X1/2 Arbor For 12mm Bore Groover For 34/17TC Only

Slotters with M12x1.0 threaded bore enables flush recessing in the corner such as for weather proofing. Spacers are supplied to ensure the minimal threaded arbor protrudes below the slotter. Arbor 33/20 enables 12mm bore guide bearings to be f...

From £17.66

More Details

Trend 33/60X1/2 Arbor 33/60 For 1/4 Bore Tools

Standard duty arbor with 1/4 inch spindle and spacers.Enables mounting of 1/4 inch bore slotters with and without bearings in a variety of positions. Use shims/spacers to prevent bearings with larger diameters touching the tips of the s...

From £18.86

More Details

Trend 33/60X1/4 Arbor 33/60 For 1/4 Bore Tools

Standard duty arbor with 1/4 inch spindle and spacers. Enables mounting of 1/4 inch bore slotters with and without bearings in a variety of positions. Use shims/spacers to prevent bearings with larger diameters touching the tips of the ...

From £18.86

More Details

Trend 33/60X8MM Arbor 33/60 For 1/4 Bore Tools

Standard duty arbor with 1/4 inch spindle and spacers. Enables mounting of 1/4 inch bore slotters with and without bearings in a variety of positions. Use shims/spacers to prevent bearings with larger diameters touching the tips of the ...

From £18.86

More Details

Trend 337X1/2TC Tongue And Groove Set

A one piece bearing guided set.Parts are inter-changed on the arbor to alter the set-up.Specification:D=41 mmC=6.35 mmC2=10 mmE=22 mmOL=76 mmShank Diameter=1/2 inchTimber thickness min.=15 m...

From £93.65

More Details

Trend 338X1/2TC Matchlining Set

A complete cutter set for producing matchlining.Jointing parts are interchanged on the arbor to change the mode of the cutter.Specification:D=47 mmC=11 mmC2=6 mmB=34 mm B2=22 mmOL=76 mmA=45 ...

From £140.47

More Details

Trend 34/03TC Slotter 2mm Kerf M12mm Bore

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.Specification:D=50 mmBore=M12Kerf=2 mmNo. of Teeth=4

From £75.97

More Details

Trend 34/10TC Slotter 3mm Kerf M12mm Bore

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.Specification:D=50 mmBore=M12Kerf=3 mmNo. of Teeth=4

From £76.69

More Details

Trend 34/110TC Slotter 5mm Kerf M12mm Bore

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.Specification:D=50 mmBore=M12Kerf=5 mmNo. of Teeth=4

From £78.29

More Details

Trend 34/11TC Slotter 4mm Kerf M12mm Bore

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.Specification:D=50 mmBore=M12Kerf=4 mmNo. of Teeth=4

From £75.97

More Details

Trend 34/12TC Slotter 6mm Kerf M12mm Bore

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.Specification:D=50 mmBore=M12Kerf=6 mmNo. of Teeth=4

From £78.29

More Details

Trend 34/13TC Slotter 8mm Kerf M12mm Bore

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.Specification:D=50 mmBore=M12Kerf=8 mmNo. of Teeth=4

From £80.63

More Details

Trend 34/14TC Slotter 11mm Kerf M12mm Bore

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.Specification:D=50 mmBore=M12Kerf=11 mmNo. of Teeth=4

From £87.48

More Details

Trend 34/15TC Slotter 10mm Kerf M12mm Bore

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.Specification:D=40 mmBore=M12Kerf=10 mmNo. of Teeth=2

From £70.20

More Details

Trend 34/16TC Slotter 15mm Kerf M12mm Bore

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.Specification:D=40 mmC=15 mmBore=M12Kerf=15 mmNo. of Teeth=2

From £70.20

More Details

Trend 34/1TC Slotter 4mm Kerf 12mm Bore

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers with or without a bearing.Specification:D=50 mmBore=12 mmKerf=4 mmNo. of Teeth=4

From £69.80

More Details

Trend 34/20TC Slotter 6mm Kerf 1/4 Bore

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.Specification:D=41.3 mmKerf=6.0 mmNo. of Teeth=2

From £43.83

More Details

Trend 34/220TC Groover 6mm Kerf 1/4 Inch Bore

Allows decorative cuts in panels and frames to disguise glue lines.Specification:D=36 mmC=6 mmR=3 mmBore=1/4 inch

From £52.24

More Details

Trend 34/2TC Slotter 6mm Kerf 12mm Bore

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers with or without a bearing.Specification:D=50 mmBore=12 mmKerf=6 mmNo. of Teeth=4

From £72.88

More Details

Trend 34/33TC Slotter 8mm Kerf 1/4 Bore

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.Specification:D=41.3 mmKerf=8.0 mmNo. of Teeth=2

From £52.18

More Details

Trend 34/3TC Slotter 8mm Kerf 12mm Bore

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers with or without a bearing.Specification:D=50 mmBore=12 mmKerf=8 mmNo. of Teeth=4

From £79.74

More Details

Trend 34/40TC Slotter 10mm Kerf 12mm Bore

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers with or without a bearing.Specification:D=50 mmBore=12 mmKerf=10 mmNo. of Teeth=4

From £82.83

More Details

Trend 34/41TC Slotter 10mm Kerf 1/4 Bore

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.Specification:D=41.3 mmKerf=10 mmNo. of Teeth=2

From £56.83

More Details

Trend 34/50X1/2TC Espagnolette Cutter 16.3/12.3mm Cut

Bearing guided tool to rout stepped groove for espagnolette lock recess.Two flute for clean finish.Specification:D1=40.05 mmCut length=16.3/12.3 mmStep=2 mmGroove depth=2/8.5 mmOL=85 mmB=19.1 mm

From £93.63

More Details

Trend 34/51X1/2TC Guided Multi Lock Cutter 20.5mm/14.2mm

Bearing guided tool to rout multi-point lock systems in wooden doors.Two flute for clean finish.Use in conjunction with multi-point lock system cutter ref. 4/09X1/2TC.Specification:D1=43.45/25.05 mmCut length=20.5/...

From £93.63

More Details

Trend 34/5TC Slotter 9.5mm Kerf M12mm Bore

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.Specification:D=50 mmBore=M12Kerf=9.5 mmNo. of Teeth=4

From £95.94

More Details

Trend 34/7TC Slotter 7mm Kerf M12mm Bore

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.Specification:D=50 mmBore=M12Kerf=7 mmNo. of Teeth=4

From £85.16

More Details