Chamfer & V Groove Cutters

Products (44)
« 1 2
Trend 10/10X1/2TC Chamfer V Groove Cutter 45 Degrees

Trend 10/10X1/2TC Chamfer V Groove Cutter 45 Degrees

Use for bevelling chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose.Specification:D=32 mmC=15 mmC2=22 mmA=45 degreesOL=66 mmShank Diameter=1/2 inch

From £62.94
More Details
Trend 10/11X1/2TC Chamfer V Groove Cutter 45 Degrees

Trend 10/11X1/2TC Chamfer V Groove Cutter 45 Degrees

Use for bevelling chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose.Specification:D=40 mmC=19 mmC2=26.5 mmA=45 degreesOL=71 mmShank Diameter=1/2 inc...

From £59.87
More Details
Trend 10/12X1/2TC Chamfer V Groove Cutter 45 Degrees

Trend 10/12X1/2TC Chamfer V Groove Cutter 45 Degrees

Use for bevelling chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose.Specification:D=51 mmC=25 mmC2=35 mmA=45 degreesOL=82 mmShank Diameter=1/2 inch

From £105.33
More Details
Trend 10/1X1/2TC Mortar Groove/Large Chamfer Cutter 45 Degrees

Trend 10/1X1/2TC Mortar Groove/Large Chamfer Cutter 45 Degrees

Use for producing mortar grooves and for bevelling applications.Specification:D=41 mmC=22.5 mmC2=23 mmA=45 degreesOL=62.5 mmShank Diameter=1/2 inch

From £63.64
More Details
Trend 10/2X1/2TC Mortar Groove/Large Chamfer 60 Degrees

Trend 10/2X1/2TC Mortar Groove/Large Chamfer 60 Degrees

Use for producing mortar grooves and for bevelling applications.Specification:D=38 mmC=27 mmC2=25.5 mmA=60 degreesOL=62.5 mmShank Diameter=1/2 inch

From £69.08
More Details
Trend 10H/1X1/4TC Pin Guided Chamfer Bevel Cutter 45 Degrees

Trend 10H/1X1/4TC Pin Guided Chamfer Bevel Cutter 45 Degrees

Ideal for fast chamfering. Popular in the sign making trades. For chamfering edges of plastic material.Specification:C=10 mmC2=14 mmP=5.5 mmA=45 degreesOL=53.5 mmShank Diameter=1/4 inch

From £49.94
More Details
Trend 11/17X1/4TC Bevel Cutter

Trend 11/17X1/4TC Bevel Cutter

Useful for bevelling thick timbers. Certain sizes can be used for jointing boxes pilasters and carcassing. Ideal for use by wood turners with smaller routers to create staves on 25mm stock. For full bevels template should be f...

From £64.42
More Details
Trend 11/1X1/2TC Chamfer V Groove Cutter 30 Degrees

Trend 11/1X1/2TC Chamfer V Groove Cutter 30 Degrees

Use for bevelling chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose.Is ideal for imitating 'V' jointed tongue and groove on man-made board.Specification:D=22.28 mmC=6...

From £41.48
More Details
Trend 11/1X1/4TC Chamfer V Groove Cutter 30 Degrees

Trend 11/1X1/4TC Chamfer V Groove Cutter 30 Degrees

Use for bevelling chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose.Specification:D=22.28 mmC=6 mmC2=12 mmA=30 degreesOL=54.5 mmShank Diameter=1/4 i...

From £41.48
More Details
Trend 11/20X1/4TC Panel Mould Cutter

Trend 11/20X1/4TC Panel Mould Cutter

Template thickness should be at least 5mm thicker than cutter cut length of cutter. Approximately 1.0mm flat will be found on the nose.Specification:D=1/2 inchD=12.7 mmC=16 mmB=12.7 mmA=60 degrees...

From £44.56
More Details
Trend 11/2X1/2TC Chamfer V Groove Cutter 45 Degrees

Trend 11/2X1/2TC Chamfer V Groove Cutter 45 Degrees

Use for bevelling chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose.Specification:D=11 mmC=5.0 mm C2=7.7 mmOL=54.5 mmA=45 degreesShank Diameter=1/2 ...

From £37.97
More Details
Trend 11/2X1/4TC Chamfer V Groove Cutter 45 Degrees

Trend 11/2X1/4TC Chamfer V Groove Cutter 45 Degrees

Use for bevelling chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose.Specification:D=11 mmC=5.0 mm C2=7.7 mmOL=52.5 mmA=45 degreesShank Diameter=1/4 ...

From £39.89
More Details
Trend 11/30X1/2TC Chamfer V Groove Cutter 45 Degrees

Trend 11/30X1/2TC Chamfer V Groove Cutter 45 Degrees

Use for bevelling chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose.Specification:D=27.5 mmC=13 mmC2=18.38 mmA=45 degreesOL=59 mmShank Diameter=1/2 ...

From £62.59
More Details
Trend 11/30X1/4TC Chamfer V Groove Cutter 45 Degrees

Trend 11/30X1/4TC Chamfer V Groove Cutter 45 Degrees

Use for bevelling chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose.Specification:D=27.5 mmC=13 mmC2=18.38 mmA=45 degreesOL=59 mmShank Diameter=1/4 ...

From £65.72
More Details
Trend 11/31X1/2TC Chamfer V Groove Cutter 45 Degrees

Trend 11/31X1/2TC Chamfer V Groove Cutter 45 Degrees

Use for bevelling chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose.Specification:D=12.7 mmC=6.5 mm C2=9 mmOL=54 mmA=45 degreesShank Diameter=1/2 in...

From £29.22
More Details
Trend 11/31X1/4TC Chamfer V Groove Cutter 45 Degrees

Trend 11/31X1/4TC Chamfer V Groove Cutter 45 Degrees

Use for bevelling chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose.Specification:D=12.7 mmC=6.5 mm C2=9 mmOL=52.7 mmA=45 degreesShank Diameter=1/2 ...

From £29.22
More Details
Trend 11/32X1/2TC Chamfer V Groove Cutter 45 Degrees

Trend 11/32X1/2TC Chamfer V Groove Cutter 45 Degrees

Use for bevelling chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose.Specification:D=17.5 mmC=8 mm C2=11.31 mmOL=52.7 mmA=45 degreesShank Diameter=1/...

From £31.32
More Details
Trend 11/32X1/4TC Chamfer V Groove Cutter 45 Degrees

Trend 11/32X1/4TC Chamfer V Groove Cutter 45 Degrees

Use for bevelling chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose.Specification:D=17.5 mmC=8 mm C2=11.31 mmOL=52.7 mmA=45 degreesShank Diameter=1/...

From £31.32
More Details
Trend 11/3X1/2TC Chamfer V Groove Cutter 45 Degrees

Trend 11/3X1/2TC Chamfer V Groove Cutter 45 Degrees

Use for bevelling chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose.Is ideal for imitating 'V' jointed tongue and groove on man-made board.Specification:D=3/4 inchD=1...

From £34.61
More Details
Trend 11/3X1/4TC Chamfer V Groove Cutter 45 Degrees

Trend 11/3X1/4TC Chamfer V Groove Cutter 45 Degrees

Use for bevelling chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose.Is ideal for imitating 'V' jointed tongue and groove on man-made board.Specification:D=3/4 inchD=1...

From £34.61
More Details
Trend 11/3X8MMTC Chamfer V Groove Cutter 45 Degrees

Trend 11/3X8MMTC Chamfer V Groove Cutter 45 Degrees

Use for bevelling chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose.Is ideal for imitating 'V' jointed tongue and groove on man-made board.Specification:D=3/4 inchD=1...

From £34.61
More Details
Trend 11/40X1/4TC Panel Mould Cutter

Trend 11/40X1/4TC Panel Mould Cutter

Template thickness should be at least 5mm thicker than cutter cut length of cutter. Approximately 1.0mm flat will be found on the nose.Specification:D=1/2 inchD=12.7 mmC=12.7 mmB=12.7 mmA=45 degrees

From £39.14
More Details
Trend 11/5X1/2TC Bevel Cutter

Trend 11/5X1/2TC Bevel Cutter

Use for bevelling chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose.Specification:D=1/2 inchD=12.89 mmC=10.3 mm C2=11.9 mmA=60 degreesOL=60 mm...

From £32.27
More Details
Trend 11/5X1/4TC Chamfer V Groove Cutter 60 Degrees

Trend 11/5X1/4TC Chamfer V Groove Cutter 60 Degrees

Use for bevelling chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose.Specification:D=1/2 inchD=12.7 mmC=10.3 mmC2=11.9 mmA=60 degreesOL=44.5 mm...

From £32.27
More Details
Trend 41/5X1/4TC Guided 3 Flute 45 Degree Chamfer X 11mm Cut

Trend 41/5X1/4TC Guided 3 Flute 45 Degree Chamfer X 11mm Cut

Three flutes for extra fine finish.Ideal for newel posts and caps for stairs. Supplied with one bearing.Specification:D1=34 mmC=11 mmB=12.7 mmA=45 degreesOL=50 mmShank Diameter=1/4

From £59.87
More Details
Trend 46/103X1/2TC Bevel Cutter

Trend 46/103X1/2TC Bevel Cutter

Useful for bevelling thick timbers. Certain sizes can be used for jointing boxes pilasters and carcassing. For full bevels template should be fitted to component.Specification:D=26 mmD2=12.7 mmC=35 mm

From £83.69
More Details
Trend 46/104X1/2TC Bevel Cutter

Trend 46/104X1/2TC Bevel Cutter

Useful for bevelling thick timbers. Certain sizes can be used for jointing boxes pilasters and carcassing. For full bevels template should be fitted to component.Specification:D=30 mmD2=12.7 mmC=35 mm

From £90.57
More Details
Trend 46/105X1/2TC Bevel Cutter

Trend 46/105X1/2TC Bevel Cutter

Useful for bevelling thick timbers. Certain sizes can be used for jointing boxes pilasters and carcassing. For full bevels template should be fitted to component.Specification:D=35 mmD2=12.7 mmC=35 mm

From £90.57
More Details
Trend 46/106X1/2TC Bevel Cutter

Trend 46/106X1/2TC Bevel Cutter

Useful for bevelling thick timbers. Certain sizes can be used for jointing boxes pilasters and carcassing. For full bevels template should be fitted to component.Specification:D=53 mmD2=12.7 mmC=33 mm

From £121.25
More Details
Trend 46/107X1/2TC Bevel Cutter

Trend 46/107X1/2TC Bevel Cutter

Useful for bevelling thick timbers. Certain sizes can be used for jointing boxes pilasters and carcassing. For full bevels template should be fitted to component.Specification:D=42 mmD2=12.7 mmC=35 mm

From £90.57
More Details
Trend 46/34X1/2TC Bearing Guided Bevel Cutter 25 Degrees

Trend 46/34X1/2TC Bearing Guided Bevel Cutter 25 Degrees

Larger bearing removes the flat. Supplied with two bearings.Specification:D=41 mmC=13 mmC1=5 mmC2=13 mmB=12.7 mmB2=19 mmA=25 degreesOL=62 mmShank Diameter=1/2 inch

From £66.76
More Details
Trend 46/360X1/2TC Guided Chamfer Cutter 45 Degrees

Trend 46/360X1/2TC Guided Chamfer Cutter 45 Degrees

Ideal for newel posts and caps for stairs. Supplied with one bearing.Specification:D=35.1 mmC=12 mmC2=16 mmB=12.7 mmA=45 degreesOL=67 mmShank Diameter=1/2 inch

From £83.69
More Details
Trend 46/360X1/4TC Bearing Guided Chamfer Cutter 45 Degrees

Trend 46/360X1/4TC Bearing Guided Chamfer Cutter 45 Degrees

Ideal for newel posts and caps for stairs. Supplied with one bearing.Specification:D=35.1 mmC=12 mmC2=16 mmB=12.7 mmA=45 degreesOL=57 mmShank Diameter=1/4 inch

From £83.69
More Details
Trend 46/361X1/2TC Guided Chamfer Cutter 45 Degrees

Trend 46/361X1/2TC Guided Chamfer Cutter 45 Degrees

Ideal for newel posts and caps for stairs. Supplied with one nylon bearing allowing use with solid surface material.Specification:D=41.3 mmC=20 mmC2=19 mmB=12.7 mmA=45 degreesChamfer width=14.3 m...

From £83.90
More Details
Trend 46/37X1/4TC Bearing Guided Chamfer Cutter 45 Degrees

Trend 46/37X1/4TC Bearing Guided Chamfer Cutter 45 Degrees

Ideal for newel posts and caps for stairs. Supplied with one bearing.Specification:D=31.8 mmC=12 mmC2=16 mmB=9.5 mmA=45 degreesOL=51 mmShank Diameter=1/4 inch

From £69.80
More Details
Trend 46/380X1/2TC Bearing Guided Chamfer Cutter 45 Degrees

Trend 46/380X1/2TC Bearing Guided Chamfer Cutter 45 Degrees

Ideal for newel posts and caps for stairs. Supplied with one bearing.Specification:D1=76 mmCut length=25.4 mmOL=90 mmB=25.4 mmA=45 degreesShank Diameter=1/2For stationary machines at max. r...

From £142.91
More Details
Trend 46/38X1/2TC Bearing Guided Chamfer Cutter 45 Degrees

Trend 46/38X1/2TC Bearing Guided Chamfer Cutter 45 Degrees

Ideal for newel posts and caps for stairs. Supplied with one bearing.Specification:D=50 mmC=19 mmC2=26 mmB=12.7 mmA=45 degreesOL=69 mmShank Diameter=1/2 inchFor stationary machines at...

From £90.57
More Details
Trend ALU/01X1/4TC Alucobond 45 Degree ⢐ Degree) V Groove X 13mm

Trend ALU/01X1/4TC Alucobond 45 Degree (90 Degree) V Groove X 13mm

Trend Professional Specialist V' Groove cutter - For routing Alucobond and Dibond13mm diameter X 10mm cutting depth 'V' Groove cutter designed for working with specialist composite cladding such as Alucobond and Dibond.Cuts a 'V' groove t...

From £49.09
More Details
Trend ALU/02X1/4TC Alucobond 22.5 Degree 𨄵 Degree) V Groove X 18mm

Trend ALU/02X1/4TC Alucobond 22.5 Degree (135 Degree) V Groove X 18mm

Specially designed tools for aluminium composite cladding material such as Alucobond Dibond which comprises an aluminium cover with polyethylene core.The v groove cutters rout into the cover and part of the core to allow folding of material by...

From £59.87
More Details
Trend S11/01X1/4STC Engraver Cutter

Trend S11/01X1/4STC Engraver Cutter

Solid Carbide for long life. Ideal for engraving and veining work.Specification:D=5 mmC=15 mmC2=16 mmA=82.5 degreesShank Diameter=1/4 inchOL=64mm

From £47.63
More Details
« 1 2

Recently Viewed

 
x
Powered by kartris