Panel raiser cutters for producing the panel for cabinet panelled doors tool matches our range of profile scribers. Suitable for use on natural timber and MDF.
For use in a router table only.
Take several passes increasing the depth with each pass.
Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF.
Stationary use only.
Can be used for curved panels if a copy pin is used.

Specification:
D=50 mm
D2=16 mm
C=12 mm
R=12 mm
OL=50 mm
Shank Diameter=1/2 inch