Self-guiding cutters for rounding over edges do not require a side fence.
They are supplied with two bearings.
Use the larger bearing for a round-over.
If the cutter is lowered a top quirk can be produced.
Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece.

Specification:
D=31.7 mm
C=5/8 inch
C=15.9 mm
B=9.5 mm
B2=12.7 mm
R=9.5 mm
OL=67.5 mm
Shank Diameter=8 mm