Subcategories
Products (14)
Slim design allows power drilling/driving in confined spaces. 1/4" hexagon drive chuck and shank. Suitable for use with most power drills.
From
£8.39
More Details
With permanent magnet, without spring ring.
Standard 1/4" Drive
Dia = 11mm
Length = 54mm
From
£10.26
More Details
With permanent magnet, with spring ring.
Standard 1/4" Drive
Dia = 11mm
Length = 75mm
From
£6.93
More Details
With permanent magnet, with spring ring.
Standard 1/4" Drive
Dia = 11mm
Length = 57mm
From
£6.36
More Details
With permanent magnet, with spring ring.
Standard 1/4" Drive
Dia = 11mm
Length = 75mm
From
£5.09
More Details
With quick change chuck and permanent magnet.
Standard 1/4" Drive
Dia = 11mm
Length = 75mm
From
£22.51
More Details
90 degree angled screwdriver attachment allows access to tight corners.Quick change chuck ensure tool is held securely.Use with bit holders, direct drive or insert screwdriver bits, hex drills and drill/countersinks.
From
£44.23
More Details
For 5/16 inch No. 131A Yankee Spiral ratchet screwdrivers (Large).The Quick Chuck replaces a standard bit and then enables Snappy tools to be used. Diameter : 23mmOL : 68mmShank Dia : 5/16"
From
£14.97
More Details
Two extra long chucks 75mm (3") and 150mm (6") in length with smaller diameter heads (18mm) to give ease of access. These two chucks will accept both direct drive and insert type bits. Can be fitted to the Trend Snappy Quick Chucks or directly into d...
From
£11.91
More Details
Magnetic 50mm (2") long chuck which accepts Trend Snappy shank fitting and insert screwdriver bits. (Magnet will hold wood screws when used with insert bits)
(Screwdriver bit not included)
From
£13.93
More Details
Magnetic screwdriver bit holder will hold screws onto 25mm inset bits. Retractable rubberised barrel ensures screwdriver bits do not jump out of screw head. Supplied with one Pozi® No.2 bit.
From
£4.43
More Details
Use drill next to walls. Drill and fixes in tight spaces. Outer sleeve rotates allowing secure positioning. Shaft swivels to 15 degree angle. Accepts both inset bits and direct drive bits.
Includes:
1 x No2 Pozi 50mm screwdriver bit
Shank Diameter ...
From
£10.78
More Details
For use with SDS Plus drills. Hammer action must be switched off when used.
From
£14.97
More Details
Sprung loaded outer sleeve makes it easy to remove attachments. Will accept all Trend Snappy attachments and standard 1/4" hex bits.
From
£10.78
More Details